General ILOM Faults Management

Hi all,
So just a quick reference: Some useful general commands for ILOM:

1. Check for Faults:

/home/boesing> ssh root@[ilom ip]    

Oracle(R) Integrated Lights Out Manager

Version 3.1.2.10 r74387

Copyright (c) 2014, Oracle and/or its affiliates. All rights reserved.

-> cd /SP/faultmgmt
/SP/faultmgmt

-> start shell
Are you sure you want to start /SP/faultmgmt/shell (y/n)? y

faultmgmtsp> 
faultmgmtsp> fmadm 
Usage: fmadm 
  where  is one of the following:
    faulty [-asv] [-u ]   : display list of faulty resources
    faulty -f                   : display faulty on FRUs
    acquit                 : acquit faults on a FRU
    acquit                : acquit faults associated with UUID
    acquit           : acquit faults specified by
                                  (FRU, UUID) combination
    replaced               : replaced faults on a FRU
    repaired               : repaired faults on a FRU
    repair                 : repair faults on a FRU
    rotate errlog               : rotate error log
    rotate fltlog               : rotate fault log

faultmgmtsp> 
faultmgmtsp> fmadm faulty
No faults found

– Another way to see current issues:

show /SP/logs/event/list show faulty

2. Clearing Faults:
In case there is a failure that can be ignored (for example, lost of AC power), it may be cleared:

set /SYS/PSU1 clear_fault_action=true

3. Checking Additional Logs:

start /SYS 
->y 
ls /SYS 
start /SP/console 
-> y
show /SP/logs/event/list 

Some MOS notes for reference:

– Diagnostic information for ILOM, ILO , LO100 issues (Doc ID 1062544.1)
– How to run an ILOM Snapshot on a Sun/Oracle X86 System (Doc ID 1448069.1)
– PSH Procedural Article for ILOM-Based Diagnosis (Doc ID 1155200.1)